PAKISTAN STEEL
MARKETING DEPARTMENT
NO: 2012/10 May 16, 2012
PRICES OF PAKISTAN STEEL PRODUCTS
EFFECTIVE FROM 16.05.2012
Ex-Mill Price in Rs. /Tonne
(Excluding Sales Tax/Excise Duty)
1. BILLETS / BLOOMS
a) Prime
i ) All Grades including SAE 1006, except SUP Series, or as specified below:-
150 x 150mm 58,500
125 x 125mm 58,500
100 x 100 / 105 x 105mm 59,000
90 x 90 / 80 x80 / 75 x 75mm 60,000
65 x 65 / 50 x 50 mm 62,000
ii) Bloom 51,800
iii) Grade SUP 6 & 7
100 x 100 mm 69,200
75 x 75 mm 69,500
iv) Grade SUP 9
100 x 100 mm 70,200
75 x 75 mm 70,500
b) Secondary Billet
i) Prices of All Secondary/Rejected/Off grade/OCB Billets will be Rs. 500 PMT
less than the price of Prime Billets for respective profile and grade.
ii) Grade charges will not apply on Secondary/Rejected/Off grade/OCB Billets.
Extra Charges for special grades of Billets/Ingot Square
a) ASTM A-615, G-60 (Rolled) & NSSR 3,500
b) ASTM A-615 G-60 (Cast), ASTM A-572 G-50 & G-40 (Rolled) 3,100
c) ASTM A-615 G-75 2,800
d) WR-20 and above, SAE 1018, A2AL, SS A 21 2,000
e) ASTM A 706 4,500
f) SAE 1008,1010,WR-8 2,500
2. HOT ROLLED PRODUCTS
a) Hot Rolled Coils - Prime (Mill Edge)
i) All grades except Grade-SG 26/255, Lloyds Grade 'A',
API 5LB up to X-70,RST 37-2CU/1543 and RST 52-3/1543
Upto 2 mm x 1000 / 1220 70,000
Over 2.00 to 2.35 x 1000 / 1220 69,600
Over 2.35 to 2.65 x 1000 / 1220 68,800
Over 2.65 to 3.65 x 1000/1220 69,600
Over 3.65 to 4.00 x 1000/1220/1500 69,500
Over 4.00 to 5.00 x 1000/1220/1500 69,700
Over 5.00 to 6.00 x 1000/1220/1500 69,500
Over 6.00 mm and above 69,100
Note:
1 Pickled and Pickled & Oiled charges @ Rs 2,500/- PMT shall be applicable over and above the prices of
respective size & grade of Prime Quality and Secondary-A material only.
2 Prices of all Secondary-A Hot Rolled Products shall be charged @ 1% below the respective
thickness-wise prices of Prime Quality Grade HR-1.
3 Prices of Secondary-B Hot Rolled Products shall be charged @7% less than the prices of Prime
(Grade HR-1) Products in respective dimension and year of manufacture.
4 Extras charges irrespective of year of manufacture:
a) For Grades:
i) 5LB 500
ii) X-42 to X-46 2,000
iii) X-52/X-56/X-60/X-65 (PSL-2) 5,000
iv) X-52/X-56/X-60/X-65 (PSL-1) 3,000
v) X-70 . 8,100
vi) RST37-2Cu/1543 & RST52-3/1543 8,600
vii) SG-26/255 2,000
viii) SAPH-440 6,700
ix) Lloyd's Grade A 7,600
b) For Shearing 300
c) For Slitting 1,425
d) Additional charges for special services to M/s.BWL 4,750
b) Chequered Material (in all grades & thicknesses)
Tear Drop Pattern
Prime
Upto 2.8 mm 77,500
Over 2.8 Upto 3.00 mm 75,500
Over 3.00 mm 73,700
Note:
1 Prices of all secondary A Chequered Material (in all grade & thickness)shall be charged @1%
below the respective thickness wise prices.
2 Prices of all secondary B Chequered Material (in all grade & thickness)shall be charged @4%
below the respective thickness wise prices.
c) Channels/Angles/Beams/Sections (in all grades)
Thickness 2.0 to 8.0 mm 64,500
d) M.S. Slabs
Mixed grade & thicknesses irrespective of year of manufacture
Prime 58,300
Short length (1-2 M)/Rejected/Axial crack 54,800
Extra charges :
for any specific grade other than mixed grade 1,000
e) MS Thick Plates (in all grades irrespective of year of manufacture)
Upto 29 mm 55,300
Over 29 Upto 49 mm 52,300
Over 49 Upto 64 mm 53,300
Over 64 Upto 99 mm 52,800
Over 99 mm 51,800
3. COLD ROLLED PRODUCTS
a) Cold Rolled Coils - Prime
i) All grades except SPCEN.
Upto 0.55 mm x 915 / 1220 / 950 82,400
Over 0.55 to 0.60 x 915 / 1220 / 950 82,000
Over 0.60 to 0.65 x 915 / 1220 / 950 81,600
Over 0.65 to 0.70 x 915 / 1220 / 950 81,600
Over 0.70 to 0.75 x 915 / 1220 / 950 81,400
Over 0.75 to 0.80 x 915 / 1220 / 950 81,300
Over 0.80 to 0.90 x 915 / 1220 / 950 81,100
Over 0.90 to 1.00 x 915 / 1220 / 950 81,000
Over 1.00 to 1.20 x 915 / 1220 / 950 77,500
Over 1.20 to 1.6 x 915 / 1220 / 950 77,100
Over 1.6 to 1.8 x 915/ 1220 / 950 76,300
Over 1.8 mm and above 75,400
Note:
1 Prices of Prime Quality Un-annealed Cold Rolled Products will be@ Rs. 500/= PMT less than the
prices of Prime Quality Cold Rolled Products.
2 Prices of Prime Quality Cold Rolled Products(annealed/unannealed) weight less than 2.00 M. Ton
shall be charged @ 1% below the respective thickness-wise prices of prime quality in the specific grade
3 Prices of all Secondary-A Cold Rolled products annealed/unannealed shall be charged @ 1% below the
respective thickness-wise prices of Prime quality Grade CR-1.
4 Prices of Secondary-A Cold Rolled products annealed/unannealed weight less than 2.00 MTN shall be
charged @ 2% below the respective thickness-wise prices of prime quality Grade CR-1.
5 Prices of Secondary-B Cold Rolled Products annealed/unannealed shall be charged @7% less than the
prices of Prime(Grade CR-1) Products in respective dimension and year of manufacture.
6 Extras charges irrespective of year of manufacture:
a) for Grades
i) SPCEN 5,500
ii) RST-12.03-Cu3 6,000
iii) CR3 500
iv) CR4 1,000
b) for Shearing 1,500
c) for Slitting 2,000
4. GALVANISED PRODUCTS
a) Galvanised Coils -Prime (all grades)
Upto 0.55 x 915 / 950 / 1220 83,800
Over 0.55 & Upto 0.60 x 915 / 950 / 1220 83,300
Over 0.60 & Upto 0.65 x 915 / 950 / 1220 82,700
Over 0.65 & Upto 0.70 x 915 / 950 / 1220 82,200
Over 0.70 & Upto 0.75 x 915 / 950 / 1220 81,700
Over 0.75 & Upto 0.80 x 915 / 950 / 1220 81,300
Over 0.80 & Upto 0.85 x 915 / 950 / 1220 80,800
Over 0.85 & Upto 0.90 x 915 / 950 / 1220 80,300
Over 0.90 & Upto 1.00 x 915 / 950 / 1220 79,800
Over 1.00 & Upto 1.5 x 915 / 950 / 1220 79,400
Over 1.5 mm 78,900
Note:
1 Prices of Prime Quality Galvanized Products weight less than, 2.00 M. Ton, shall be charged @ 1%
below the respective thickness-wise prices of prime quality in the specific grade.
2 Prices of all Secondary-A Galvanised products shall be charged @ 2% below the respective
thickness-wise prices of Prime quality Grade G-01.
3 Prices of all Secondary-A Galvanised product weight less than 2.00 MTN shall be
charged @ 4% below the respective thickness-wise prices of prime quality Grade-G-01.
4 Prices of Secondary-B Galvanized Products shall be charged @ 10 % less than the prices of Prime
(Grade G-01) Products in respective dimension and year of manufacture.
5. UNSORTED PRODUCTS
Product Code
a) HR 954 Un-sorted End Cuts (HR) 60,200
956 Rejected HR Sheet Un-sorted 62,700
957 Un-sorted Rej. HR Sheet (P and P&O) 60,400
958 Un-Sorted Rej. HR Chq. Sheet 66,100
b) CR 951 Un-sorted End Cuts (CR.A) 59,200
952 Un-sorted End Cuts (CR.T) 62,700
953 Un-sorted End Cuts (CR U) 58,800
961 Un-sorted Annealed Coil 58,000
962 Un-sorted Temper Coil 60,800
964 Un-sorted Un-Annealed Coil 58,000
965 Un-sorted Rej. C.R. Sheet 66,200
c) GP 955 Un-sorted End Cuts (GP) 60,400
963 Un-sorted GP Coil 63,500
6. BY -PRODUCTS
(a) Pig Iron
CPI ( All types incl. off grade CPI-S and imported) 46,200
FPI - 5 / 6 / 5S / 6S / 5HMn / 6HMn/ HSi/ Off Grade 51,000
FPI - 4 / 4S / 4HMn 53,700
FPI - 3 / 3S / 3HMn 53,700
FPI - 2 / 2S / 2HMn 54,700
FPI - 1 / 1S / 1HMn 54,700
Pig Iron Residue 44,250
Pig Iron (Dust) 41,750
Pig Iron Disc Scrap 47,400
(b) Coking Coal
1. Coking Coal Medium Volatile Grade 26,418
2. Coking Coal Low Volatile Grade 28,362
(c) Hard Coke
1.1 Coke Dust ( 0 - 1 mm ) Bulk in Loose form 8,500
1.2 Coke Dust ( 0 - 1 mm ) Packed in 50 kg Bags 8,800
2. Coke Breeze (0 - 10 mm) 11,000
3. Coke Breeze (0 - 15 mm) 14,000
4. Coke Breeze ( 0 - 25 mm ) 17,000
5. Coke 25 mm upto 80 mm 38,500
6. Over 80 mm 48,500
Note:
Extra charges @ Rs. 200/- PMT for allowing hand picking of Coke size +80mm by labours/workers
deployed by the buyers on their account shall be payable at the time of obtaining Delivery Order(s).
(d) Ammonium Sulphate
Bulk: in loose form 24,500
Packed: in 50 kg bags 24,800
(e) Coal Tar 39,000
(f) Solar Oil 61,000
(g) Slag
Granulated 600
BF Boulder Slag (BF waste: Product Code: 906) 75
Convertor Slag 750
Boulder Slag alongwith HMLR contents 725
(h) Oxygen/Nitrogen (in Cu.m.) 30
(i) HMLR 38,500
(j) Runner Scrap 39,500
(k) Steel Metal Ladle Residue (SMLR) Scrap 35,000
(l) Steel Scrap Retrieved from Converter Slag
i. 0-60mm 12,000
ii. 05-60mm 14,000
iii. 30-60mm 22,000
iv. 60-300mm 24,500
v. Over 300mm 27,000
(m) Mill Scale 14,800
(n) Iron Oxide 17,600
(o) Tar Bonded Dolomite (TBD) Bricks (In all grades/sizes/shapes) 34,000
(p) Chamote Powder
i. 0-3mm 5,900
ii. 0-20mm 5,900
(q) Tundish Well Block CN-42 37,250
(r) Bricks Fire Clay in all sizes & Shapes 19,800
(s) i. Calcined Dolomite (Dead Burnt Dolomite) 13,450
ii. Calcined Lime (Burnt Lime) Size 0-10 mm 5,400
iii. Calcined Lime (Burnt Lime) Size 10-50 mm 5,400
iv. Lime Stone Size 0-20 mm (Ex. BMD Makli Quarries) 110
v. Lime Stone Size 20-50 mm (Ex. BMD Makli Quarries) 700
(t) Mortar 41,000
(u) Burnt Refractory Bricks (Mixed) 11,500
(v) Zinc Dross 98,000
(w) Bulk Hot Metal Skull 33,500
(X) Pressed & Bundled Steel Scrap 41,000
Note:
i) The prices are subject to change without notice.
ii) Items, whose prices have not been indicated in this price list, are not to be offered for sale.
iii) All materials shall be allocated subject to availability.
Aisha Steel Mills Limited Send Business Enquiry
Aisha Steel Mills Limited (ASML) was incorporated in 2005 to set up a steel mill in the downstream Industrial Estate of Pakistan Steel, Bin Qasim Karachi. Three renowned groups ie "UNIVERSAL METAL CORPORATION JAPAN", "METAL ONE" (group company of Mitsubishi Corporation Japan) and "ARIF HABIB GROUP" have entered into a Joint Venture to run and operate the proposed steel mill. Keeping in mind the market potential with the growing demand and non-availability of manufacturing facilities for value added steel products such as, Cold Rolled Coils (CRC) classified into Hard, Skin pass & Annealed, the Group envisages setting up a state of the art steel mill for manufacturing value added steel products to cater to the requirements of various segments of the industry. The project will cater to the requirements of value added products used by various segments of the industry such as auto sector and engineering sector in Pakistan. At present these products are imported by the industry, therefore this project will serve as import substitute for the country. The proposed steel mill offers the company a distinctive edge in the field for reasons such as, it shall be the largest steel mill in the private sector, and most importantly ASML shall produce CRC in thickness and grades not produced by Pakistan Steel and other local manufacturers thus creating a niche market for the company.
Contact : Ali Akhtar Khan
Address: 709, Business & Finance Centre, I.I Chundrigar Road Karachi
Phone: +92-21-32474884
Fax: +92-21-32470201
Website : www.aishasteel.com
Certifications:
Testing Facilities:
Trade Fairs Attended:
Business Type:
MARKETING DEPARTMENT
NO: 2012/10 May 16, 2012
PRICES OF PAKISTAN STEEL PRODUCTS
EFFECTIVE FROM 16.05.2012
Ex-Mill Price in Rs. /Tonne
(Excluding Sales Tax/Excise Duty)
1. BILLETS / BLOOMS
a) Prime
i ) All Grades including SAE 1006, except SUP Series, or as specified below:-
150 x 150mm 58,500
125 x 125mm 58,500
100 x 100 / 105 x 105mm 59,000
90 x 90 / 80 x80 / 75 x 75mm 60,000
65 x 65 / 50 x 50 mm 62,000
ii) Bloom 51,800
iii) Grade SUP 6 & 7
100 x 100 mm 69,200
75 x 75 mm 69,500
iv) Grade SUP 9
100 x 100 mm 70,200
75 x 75 mm 70,500
b) Secondary Billet
i) Prices of All Secondary/Rejected/Off grade/OCB Billets will be Rs. 500 PMT
less than the price of Prime Billets for respective profile and grade.
ii) Grade charges will not apply on Secondary/Rejected/Off grade/OCB Billets.
Extra Charges for special grades of Billets/Ingot Square
a) ASTM A-615, G-60 (Rolled) & NSSR 3,500
b) ASTM A-615 G-60 (Cast), ASTM A-572 G-50 & G-40 (Rolled) 3,100
c) ASTM A-615 G-75 2,800
d) WR-20 and above, SAE 1018, A2AL, SS A 21 2,000
e) ASTM A 706 4,500
f) SAE 1008,1010,WR-8 2,500
2. HOT ROLLED PRODUCTS
a) Hot Rolled Coils - Prime (Mill Edge)
i) All grades except Grade-SG 26/255, Lloyds Grade 'A',
API 5LB up to X-70,RST 37-2CU/1543 and RST 52-3/1543
Upto 2 mm x 1000 / 1220 70,000
Over 2.00 to 2.35 x 1000 / 1220 69,600
Over 2.35 to 2.65 x 1000 / 1220 68,800
Over 2.65 to 3.65 x 1000/1220 69,600
Over 3.65 to 4.00 x 1000/1220/1500 69,500
Over 4.00 to 5.00 x 1000/1220/1500 69,700
Over 5.00 to 6.00 x 1000/1220/1500 69,500
Over 6.00 mm and above 69,100
Note:
1 Pickled and Pickled & Oiled charges @ Rs 2,500/- PMT shall be applicable over and above the prices of
respective size & grade of Prime Quality and Secondary-A material only.
2 Prices of all Secondary-A Hot Rolled Products shall be charged @ 1% below the respective
thickness-wise prices of Prime Quality Grade HR-1.
3 Prices of Secondary-B Hot Rolled Products shall be charged @7% less than the prices of Prime
(Grade HR-1) Products in respective dimension and year of manufacture.
4 Extras charges irrespective of year of manufacture:
a) For Grades:
i) 5LB 500
ii) X-42 to X-46 2,000
iii) X-52/X-56/X-60/X-65 (PSL-2) 5,000
iv) X-52/X-56/X-60/X-65 (PSL-1) 3,000
v) X-70 . 8,100
vi) RST37-2Cu/1543 & RST52-3/1543 8,600
vii) SG-26/255 2,000
viii) SAPH-440 6,700
ix) Lloyd's Grade A 7,600
b) For Shearing 300
c) For Slitting 1,425
d) Additional charges for special services to M/s.BWL 4,750
b) Chequered Material (in all grades & thicknesses)
Tear Drop Pattern
Prime
Upto 2.8 mm 77,500
Over 2.8 Upto 3.00 mm 75,500
Over 3.00 mm 73,700
Note:
1 Prices of all secondary A Chequered Material (in all grade & thickness)shall be charged @1%
below the respective thickness wise prices.
2 Prices of all secondary B Chequered Material (in all grade & thickness)shall be charged @4%
below the respective thickness wise prices.
c) Channels/Angles/Beams/Sections (in all grades)
Thickness 2.0 to 8.0 mm 64,500
d) M.S. Slabs
Mixed grade & thicknesses irrespective of year of manufacture
Prime 58,300
Short length (1-2 M)/Rejected/Axial crack 54,800
Extra charges :
for any specific grade other than mixed grade 1,000
e) MS Thick Plates (in all grades irrespective of year of manufacture)
Upto 29 mm 55,300
Over 29 Upto 49 mm 52,300
Over 49 Upto 64 mm 53,300
Over 64 Upto 99 mm 52,800
Over 99 mm 51,800
3. COLD ROLLED PRODUCTS
a) Cold Rolled Coils - Prime
i) All grades except SPCEN.
Upto 0.55 mm x 915 / 1220 / 950 82,400
Over 0.55 to 0.60 x 915 / 1220 / 950 82,000
Over 0.60 to 0.65 x 915 / 1220 / 950 81,600
Over 0.65 to 0.70 x 915 / 1220 / 950 81,600
Over 0.70 to 0.75 x 915 / 1220 / 950 81,400
Over 0.75 to 0.80 x 915 / 1220 / 950 81,300
Over 0.80 to 0.90 x 915 / 1220 / 950 81,100
Over 0.90 to 1.00 x 915 / 1220 / 950 81,000
Over 1.00 to 1.20 x 915 / 1220 / 950 77,500
Over 1.20 to 1.6 x 915 / 1220 / 950 77,100
Over 1.6 to 1.8 x 915/ 1220 / 950 76,300
Over 1.8 mm and above 75,400
Note:
1 Prices of Prime Quality Un-annealed Cold Rolled Products will be@ Rs. 500/= PMT less than the
prices of Prime Quality Cold Rolled Products.
2 Prices of Prime Quality Cold Rolled Products(annealed/unannealed) weight less than 2.00 M. Ton
shall be charged @ 1% below the respective thickness-wise prices of prime quality in the specific grade
3 Prices of all Secondary-A Cold Rolled products annealed/unannealed shall be charged @ 1% below the
respective thickness-wise prices of Prime quality Grade CR-1.
4 Prices of Secondary-A Cold Rolled products annealed/unannealed weight less than 2.00 MTN shall be
charged @ 2% below the respective thickness-wise prices of prime quality Grade CR-1.
5 Prices of Secondary-B Cold Rolled Products annealed/unannealed shall be charged @7% less than the
prices of Prime(Grade CR-1) Products in respective dimension and year of manufacture.
6 Extras charges irrespective of year of manufacture:
a) for Grades
i) SPCEN 5,500
ii) RST-12.03-Cu3 6,000
iii) CR3 500
iv) CR4 1,000
b) for Shearing 1,500
c) for Slitting 2,000
4. GALVANISED PRODUCTS
a) Galvanised Coils -Prime (all grades)
Upto 0.55 x 915 / 950 / 1220 83,800
Over 0.55 & Upto 0.60 x 915 / 950 / 1220 83,300
Over 0.60 & Upto 0.65 x 915 / 950 / 1220 82,700
Over 0.65 & Upto 0.70 x 915 / 950 / 1220 82,200
Over 0.70 & Upto 0.75 x 915 / 950 / 1220 81,700
Over 0.75 & Upto 0.80 x 915 / 950 / 1220 81,300
Over 0.80 & Upto 0.85 x 915 / 950 / 1220 80,800
Over 0.85 & Upto 0.90 x 915 / 950 / 1220 80,300
Over 0.90 & Upto 1.00 x 915 / 950 / 1220 79,800
Over 1.00 & Upto 1.5 x 915 / 950 / 1220 79,400
Over 1.5 mm 78,900
Note:
1 Prices of Prime Quality Galvanized Products weight less than, 2.00 M. Ton, shall be charged @ 1%
below the respective thickness-wise prices of prime quality in the specific grade.
2 Prices of all Secondary-A Galvanised products shall be charged @ 2% below the respective
thickness-wise prices of Prime quality Grade G-01.
3 Prices of all Secondary-A Galvanised product weight less than 2.00 MTN shall be
charged @ 4% below the respective thickness-wise prices of prime quality Grade-G-01.
4 Prices of Secondary-B Galvanized Products shall be charged @ 10 % less than the prices of Prime
(Grade G-01) Products in respective dimension and year of manufacture.
5. UNSORTED PRODUCTS
Product Code
a) HR 954 Un-sorted End Cuts (HR) 60,200
956 Rejected HR Sheet Un-sorted 62,700
957 Un-sorted Rej. HR Sheet (P and P&O) 60,400
958 Un-Sorted Rej. HR Chq. Sheet 66,100
b) CR 951 Un-sorted End Cuts (CR.A) 59,200
952 Un-sorted End Cuts (CR.T) 62,700
953 Un-sorted End Cuts (CR U) 58,800
961 Un-sorted Annealed Coil 58,000
962 Un-sorted Temper Coil 60,800
964 Un-sorted Un-Annealed Coil 58,000
965 Un-sorted Rej. C.R. Sheet 66,200
c) GP 955 Un-sorted End Cuts (GP) 60,400
963 Un-sorted GP Coil 63,500
6. BY -PRODUCTS
(a) Pig Iron
CPI ( All types incl. off grade CPI-S and imported) 46,200
FPI - 5 / 6 / 5S / 6S / 5HMn / 6HMn/ HSi/ Off Grade 51,000
FPI - 4 / 4S / 4HMn 53,700
FPI - 3 / 3S / 3HMn 53,700
FPI - 2 / 2S / 2HMn 54,700
FPI - 1 / 1S / 1HMn 54,700
Pig Iron Residue 44,250
Pig Iron (Dust) 41,750
Pig Iron Disc Scrap 47,400
(b) Coking Coal
1. Coking Coal Medium Volatile Grade 26,418
2. Coking Coal Low Volatile Grade 28,362
(c) Hard Coke
1.1 Coke Dust ( 0 - 1 mm ) Bulk in Loose form 8,500
1.2 Coke Dust ( 0 - 1 mm ) Packed in 50 kg Bags 8,800
2. Coke Breeze (0 - 10 mm) 11,000
3. Coke Breeze (0 - 15 mm) 14,000
4. Coke Breeze ( 0 - 25 mm ) 17,000
5. Coke 25 mm upto 80 mm 38,500
6. Over 80 mm 48,500
Note:
Extra charges @ Rs. 200/- PMT for allowing hand picking of Coke size +80mm by labours/workers
deployed by the buyers on their account shall be payable at the time of obtaining Delivery Order(s).
(d) Ammonium Sulphate
Bulk: in loose form 24,500
Packed: in 50 kg bags 24,800
(e) Coal Tar 39,000
(f) Solar Oil 61,000
(g) Slag
Granulated 600
BF Boulder Slag (BF waste: Product Code: 906) 75
Convertor Slag 750
Boulder Slag alongwith HMLR contents 725
(h) Oxygen/Nitrogen (in Cu.m.) 30
(i) HMLR 38,500
(j) Runner Scrap 39,500
(k) Steel Metal Ladle Residue (SMLR) Scrap 35,000
(l) Steel Scrap Retrieved from Converter Slag
i. 0-60mm 12,000
ii. 05-60mm 14,000
iii. 30-60mm 22,000
iv. 60-300mm 24,500
v. Over 300mm 27,000
(m) Mill Scale 14,800
(n) Iron Oxide 17,600
(o) Tar Bonded Dolomite (TBD) Bricks (In all grades/sizes/shapes) 34,000
(p) Chamote Powder
i. 0-3mm 5,900
ii. 0-20mm 5,900
(q) Tundish Well Block CN-42 37,250
(r) Bricks Fire Clay in all sizes & Shapes 19,800
(s) i. Calcined Dolomite (Dead Burnt Dolomite) 13,450
ii. Calcined Lime (Burnt Lime) Size 0-10 mm 5,400
iii. Calcined Lime (Burnt Lime) Size 10-50 mm 5,400
iv. Lime Stone Size 0-20 mm (Ex. BMD Makli Quarries) 110
v. Lime Stone Size 20-50 mm (Ex. BMD Makli Quarries) 700
(t) Mortar 41,000
(u) Burnt Refractory Bricks (Mixed) 11,500
(v) Zinc Dross 98,000
(w) Bulk Hot Metal Skull 33,500
(X) Pressed & Bundled Steel Scrap 41,000
Note:
i) The prices are subject to change without notice.
ii) Items, whose prices have not been indicated in this price list, are not to be offered for sale.
iii) All materials shall be allocated subject to availability.
Aisha Steel Mills Limited Send Business Enquiry
Aisha Steel Mills Limited (ASML) was incorporated in 2005 to set up a steel mill in the downstream Industrial Estate of Pakistan Steel, Bin Qasim Karachi. Three renowned groups ie "UNIVERSAL METAL CORPORATION JAPAN", "METAL ONE" (group company of Mitsubishi Corporation Japan) and "ARIF HABIB GROUP" have entered into a Joint Venture to run and operate the proposed steel mill. Keeping in mind the market potential with the growing demand and non-availability of manufacturing facilities for value added steel products such as, Cold Rolled Coils (CRC) classified into Hard, Skin pass & Annealed, the Group envisages setting up a state of the art steel mill for manufacturing value added steel products to cater to the requirements of various segments of the industry. The project will cater to the requirements of value added products used by various segments of the industry such as auto sector and engineering sector in Pakistan. At present these products are imported by the industry, therefore this project will serve as import substitute for the country. The proposed steel mill offers the company a distinctive edge in the field for reasons such as, it shall be the largest steel mill in the private sector, and most importantly ASML shall produce CRC in thickness and grades not produced by Pakistan Steel and other local manufacturers thus creating a niche market for the company.
Contact : Ali Akhtar Khan
Address: 709, Business & Finance Centre, I.I Chundrigar Road Karachi
Phone: +92-21-32474884
Fax: +92-21-32470201
Website : www.aishasteel.com
Certifications:
Testing Facilities:
Trade Fairs Attended:
Business Type:
No comments:
Post a Comment